Back to top

1974 Westsail W32

Anacortes, Washington

$28,900

The West Sail 32 set the standard for the first generation of production cruising boats. Designed by Crealock, they were an extension of the famous Colin Archer Norwegian lifeboat design of the 1890s. A proven hull, they are heavily laid up with 24 layers of uni-directional cloth, encapsulated iron and lead ballast, robust scantlings, heavy bronze hardware, and (with the factory finished hulls) well executed hardwoods in the finish work. The deck is 1?2? marine ply sandwiched between two heavy built up layers of roving/glass. This particular vessel has been provided with numerous upgrades from the custom stainless steel bowsprit system, custom stern pulpit and boom kin system, newer wind vane self steering, and a newly rebuilt and re-installed Perkins engine. The performance of the West Sail 32 is varied ... but their performance at sea is proven over the years. They have excellent sea-keeping ability despite a somewhat wet ride ... but have earned a reputation for surviving the harshest conditions. This vessel has been outfitted for and has completed one round trip to the Hawaii Islands under a prior owner, solo.

Basic Boat Info

Price: $28,900 (Sale Pending)
Boat Name: VELATUAS
Make: Westsail
Model: W32
Year: 1974
Condition: Used
Category: Sail
Designer: William Crealock
Construction: Fiberglass
Boat Hull ID: 108
Has Hull ID: Yes
Keel Type: Other

Dimensions

Length: 32 ft
Length Overall: 40 ft
Waterline Length: 27'6 ft
Beam: 11 ft
Max Draft: 5 ft
Displacement: 20,000 lb
Bridge Clearance: 49 ft
Ballast: 7,000 lb

Engines / Speed

Engines: 1
  • Make: Perkina
  • Model: M50
  • Drive Type: Direct
  • Fuel: Diesel
  • Engine Power: 50hp
  • Type: Inboard
Cruising Speed: 7 kn

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 70 gal
Water Tanks: 2
Water Tank Capacity: 80 gal

Other

Heads Count: 1
Drive Type: Direct
Boat Class: Sloop, Cutter

Contact

Bob Wolven
"Always, People First" Bob Wolven 425-224-2688
Everett Yacht Sales

Office

Everett Yacht Sales
300 W. Marine View Drive
Everett, Washington, US, 98201
Tel:(425) 224-2648
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Interior
This vessel was one of the 430+ / 800 hulls which were factory finished. She has 3 major and several intermediate bulkheads which are fully tabbed to the hull. The majority of the interior is fitted out in mahogany and teak to a high degree.
Upon entering the main cabin, there is a U shaped galley to port with stove, drop in frig, deep double stainless steel sink and ample storage. Adjacent to starboard is addl. Storage and chart table.
Immediately forward of the galley is a large settee table with seating for up to four and ample storage. The area is fitted with oil lamp and a barometer and clock.
Immediately forward of the starboard chart table is additional storage and a pilot berth ... with a diesel heater installed on the bulkhead forward.
The head is formed between two bulkheads amidships to port and has a commode, sink and full storage. Adjacent to starboard is additional storage lockers.
The forward compartment of the vessel is formed with a double berth to port ... and additional lockers and storage to starboard. Immediately forward of the berth is the forepeak bulkhead and access to the chainlocker.
The overheads are largely vinyl covered foam with battens. The interior is in good condition with serviceable upholstery.
Rigging/Sails
RUNNING RIGGING
Halyards: Main halyard 1/2" Dacron braid Jib/Staysail Halyard 1/2" Dacron braid
Jib Sheets: 1/2" Dacron yacht braid Main Sheet: 1/2" Dacron yacht braid
Out haul: 3/8" Dacron yacht braid Reefings: #1 and #2 colored 1/2" Dacron yacht braid Spinnaker Halyard: 1/2" Dacron yacht braid Spinnaker Top: 3/8' Dacron yacht braid

Stays and Shrouds: Forward lowers and upper shrouds 5/16"- 3/8" 1x19 stainless Aft lowers 1/4" 1x19" stainless
Turnbuckles: Original/barrel type Chain plates: Stainless plates Furling: North sails
Backstay: 1/4"
Backing plates: Full / to heavy FRP bulkheads Back stays: Running backs provided
Bobstay: 1/2" s/s


Electronics
Compass- Ritchie bulkhead mount VHF/FM- Standard Horizon Matrix AIS GPS- Garmin color GPS Map 740s Single Side Band- SGCSSB Autopilot-Cape Horn Windvane (custom s/s installation) Barometer- one small/one 5" brass w small brass clock Annemometer- Mast fly
Features
  • Step Mast
  • New Radar
  • Wind Vane
  • Boom Tent
  • Blue Water Canvas
  • Hard Top and Canvas
  • 60 Hours on Rebuild
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

$
%
$
Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.